In this video, we demonstrate how to change a surge protection device (SPD) in your solar power system. Surge protection devices are essential for protecting your solar panels and inverters from transient overvoltage caused by lightning strikes and switching operations. Follow our step-by-step guide to ensure a safe and effective replacement.
Surge protection devices (SPDs) are crucial for safeguarding solar power systems from transient overvoltage, typically caused by lightning strikes or switching operations. Here’s a detailed explanation of how SPDs work and protect solar systems, along with a guide on changing an SPD and a suggested UA-cam video description:
How Surge Protection Devices Work in Solar Systems
1. Protection Mechanism:
Detection and Diversion: SPDs detect overvoltage and divert excess electrical energy away from sensitive components to the ground. This prevents damage to the solar panels, inverters, and other equipment.
Clamping Voltage: SPDs have a clamping voltage threshold. When the voltage exceeds this threshold, the SPD activates, reducing the overvoltage to a safe level.
Energy Absorption: SPDs absorb the excess energy, ensuring it does not reach the critical components of the solar system.
2. Types of SPDs:
Type 1: Installed at the point of entry into the building, they protect against direct lightning strikes.
Type 2: Positioned downstream of Type 1, they handle residual surges from indirect lightning and switching surges.
Type 3: Located near the end devices, they provide fine protection and handle low-level surges.
How to Change a Surge Protection Device
Step-by-Step Guide:
Safety First:
Turn off the main power supply.
Ensure all residual power is discharged by using a multimeter to check for any remaining voltage.
Locate the SPD:
Identify the SPD in the solar system. It's usually found in the main distribution board or close to the inverter.
Disconnect the SPD:
Disconnect the wires connected to the SPD. Note the wiring configuration for reinstallation.
Remove the SPD:
Unscrew and remove the faulty SPD from its mounting.
Install the New SPD:
Mount the new SPD in place.
Reconnect the wires following the noted configuration.
Test the Installation:
Turn on the main power supply.
Check the SPD indicator (usually an LED) to ensure it is functioning correctly.
Use a multimeter to confirm proper voltage levels.
Final Check:
Verify the entire solar system is operational without any faults.
***Contact us For Booking/Event Invitations/Sponsors your Products/Business Inquiries***
TK Techo WhatsApp Only +92 331 5496013
maliktaimur@rocketmail.com
Other useful Videos :
How To Reduce Electricity Bill By Using A Reverse Light And Earth Light Solution In Energy Meter
ua-cam.com/video/ogTQ3FjWjdg/v-deo.html
DC 1000 watt Solar System with SIMTEK 60A MPPT plus Hybrid Solar charge controller and One panel
ua-cam.com/video/GPPl90K3R4g/v-deo.html
How to run 1.5 Ton AC on Small Solar System | 2.5 Kw Solar System Price in Pakistan
ua-cam.com/video/4hTQa0qU7Xc/v-deo.html
6KW Hybrid Solar System with Solar Max Inverter | Phoenix battery and LONGI Solar Panels
ua-cam.com/video/TPTYkg0jQ7k/v-deo.html
How To Save Electricity Bill | Reduce Electricity Bill | revers light and earth light warning
ua-cam.com/video/rIuxnEfmU0c/v-deo.html
6kW Hybrid Solar System with Tesla Inverter Longi Solar Panels and Phoenix Batteries
ua-cam.com/video/rngOjFPxEzs/v-deo.html
How to Check and Solve Two Digital Meter Neutral Common Fault | Common Neutral Issue
ua-cam.com/video/kaDocsyQP14/v-deo.html